Home

 

 

 

 

Honda CBR1000RR Superbike Package 186HP 

    Dano's Performance has developed this Superbike Package for the 2008-16 Honda CBR1000RR.One of the great features of this package is that you only need to remove is the cylinder head to install it. The typical horsepower gain achieved with this package is 15-17 horsepower (185-187) In order to obtain all the performance available with this package, you will need to send us your ECU so we can program it to accommodate this package and we will also need to raise the rpm limiter to 13,750 rpms. See our Honda ECU Flash page for all the details. Also recommended is a good quality exhaust system and a Dynojet Power Commander to allow for proper tuning. The following is all that is included in our Honda CBR1000RR Superbike Package:
                1) Cylinder head porting which maximizes intake and exhaust air flow
                    2) Install new valve stem seals
                         3) Three angle valve job
                    4) Resurface the cylinder head base 
                        5) Custom intake and exhaust cams
                        6)  Custom performance Head gasket
                        7) Manual cam chain tensioner for precise cam timing
                         8) Custom exhaust gaskets

Just released our Superbike Package for the 2017 Honda CBR1000RR models !!

This package increases horsepower output 15-17 HP ( 194-196 HP ) and sells for $1995.00

The total price for this Superbike package is $1995.00. All we need for you to send us is your complete cylinder head and when completed we will ship you back the complete package. The cylinder head will be complete with the valve clearances set and ready to bolt back on to your engine. To purchase this package you can make your payment via Pay Pal then ship us your complete cylinder head. Once we receive the cylinder head from you it typically takes 2-3 weeks for us to complete then ship your package to you ready to install. For our international customers who would like to purchase the complete package including the cylinder head  the price is $3200.00 + shipping for the 2008-11 models and $3400.00 + shipping for the 2012-16 models. If you would like to have us install this package the cost will be $2675.00 + shipping which includes degreeing the cams.
   

 

Cam Sprockets

For customers who would like the ability to degree the cams in we can install a set of slotted cam sprockets which will make it possible. The cost of these slotted cam sprockets is $70.00 per set.

Honda CBR1000RR Superbike Racing Cams

These drop in cams are the same cams used in our Honda CBR1000RR Superbike Package. Typical gains with just these cams is 6-8 horsepower and can be installed using the stock valve springs. These cams are  legal for AMA Superbike racing since they offer more lift and more duration. They will fit the 2008-11 Honda CBR1000RR models. The retail price of these cams is $1050.00. These cams will ship out two weeks from the time of your purchase.
 

 

U.S.   Customers

 click here

   $1,050.00 ea.

International   Customers

 click here

 $1,050.00 ea.

 

 

Honda CBR1000RR Power Up Kit

This bolt on package is great bang for the buck with typical gains of 9-11 horsepower. Developed exclusively for the 2008-11 Honda CBR1000RR models. Included is a set of our Superbike cams, thinner head gasket, manual cam chain tensioner and custom exhaust gaskets. The retail price of this package is $1295.00.00. This package will ship out two weeks from the time of your purchase.

 

U.S.   Customers

 click here

 $1,295.00 ea.

International   Customers

 click here

 $1,295.00 ea.

Honda CBR1000RR & CBR600RR Smog Block Off Plates

This smog block off kit fits the 2004 -18 Honda CBR1000RR and the 2007-18 Honda CBR600RR model bikes. In order to achieve the correct air / fuel ratio this emissions equipment must be eliminated. This will correct popping on deceleration and part throttle surging. This means you can unplug and remove the Pair Valve and all the hoses for a much tidier engine compartment. The retail price for this complete kit is $24.95 + $9.95 Priority mail shipping. For our international customers the shipping cost is $18.95 for International First class mail shipping.

  

  

U.S.   Customers

 click here

 $24.95 ea.

International   Customers

 click here

 $24.95 ea.

Honda CBR1000RR Superbike + Package

We developed this package for the 2008-16 Honda CBR1000RR models for the guy who wants the ultimate in performance. This package will produce 215 + horsepower at the rear wheel. In addition to the components listed above in our Superbike package we include a set of 2mm overbore (1052cc) high compression pistons and a set of Carrillo rods. We also remove the crankshaft balancer  and race balance the crankshaft. The price of this package is $6300.00 + shipping. You will need to send use your complete engine and when we complete it we will ship it back to you ready to install. For customers running under Superbike class rules in which 1000cc displacement must be maintained we will install high compression standard bore size pistons. This package will produce 205 + horsepower and the price will be $5800.00. Call or email us for the details.

Honda CBR1000RR Superbike + Package crate motors.

Dano's Performance is now offering ready built complete Superbike + package crate motors for the 2008-16 Honda CBR1000RR. These engines are complete and ready to install with no core required. Included with these engines are all the components listed above in the Superbike and Superbike + package. In addition to all these components are the following:
1) Blueprinted transmission
2) Heavy duty clutch pack
These engines will produce a reliable 215 + horsepower at the rear wheel. For customers running under Superbike class rules in which 1000cc displacement must be maintained, we will install high compression standard bore size pistons. This package will produce 205 + horsepower and the price will be $8400.00.
Danos Performance is now offering  Super Stock crate engines for the 2008-16 Honda CBR1000RR bikes. These engines are fully rebuilt to better then Honda stock specifications with a performance high compression head gasket installed and degreed cams. We also remove the crank balance shaft and we race balance the crankshaft. These engines make 10 more horsepower (180HP) then a stock engine does and we are offering them for $5995.00 + shipping.
If you would like to send us your engine the labor cost for a basic rebuild will be $1995.00 (which includes a three angle valve job) + the cost of the parts that are needed.

$8900.00 + shipping

Call or email us for the details and availability.

These engines are available to our international customers with shipping worldwide !!!