Sportbike Services

     We are a true sportbike enthusiasts shop specializing in only late model fuel injected Japanese Sportbikes.The four Japanese brands we specialize in are Honda, Yamaha, Kawasaki and Suzuki.  We offer over 17 years of roadracing and tuning experience to help you obtain the highest performance from your motorcycle. You simply cannot get the type of service we offer at most shops because most technicians who work for them have only received training at a trade school. The knowledge and expertise we offer is not taught in any trade school.  If you would like to take your bike in for service and actually get it back performing better than before you bring it in  we are your kind of shop.  We offer a three step high performance tune and service which you cannot get at your local Dealer.  If you are a street rider, track day rider or a racer we can assist you with our race and championship winning expertise. Call or email us for a quote for service on your bike. What you will find is that we can offer a much higher level of service at a very fair price. The reason we can offer more at a reasonable price than your local Dealer is because we don't have the high overhead cost they do.

    Whenever a bike is tuned on any Dynamometer and air/fuel ratio probe is inserted into the exhaust tail pipe. The person makes a pass on the Dyno, then the air/fuel ratio data is observed and then fuel map is adjusted to achieve the desired air/fuel ratio.  The air/fuel data since it is taken at the tail pipe is a sum of all four cylinders. If one fuel injector is dirty (lean cylinder)  it is very difficult to detect since the probe is looking at the sum of all four. If the fuel injectors are not first flow matched before the bike is Dyno tuned, then the final tune is not accurate. Most performance shops are not even aware of this fact.

Superstock Performance Package

    If you are local Sportbike owner who is interested in taking the performance of your bike to the next level this package is a great value. Included with this package we will perform all the steps listed above in our three step performance tune and service along with these additional steps: 

    1) Remove and replace the cylinder head

    2) Machine the cylinder head base for added compression

    3) Machine the valves and valve seats for an airtight seal and replace the valve stem seals.

      Also included in the package we will install a thinner head gasket which also helps to add even more compression and a manual cam chain tensioner for precise cam timing.  Adding more compression is a good way to add more horsepower and torque output from your engine. Typical horsepower gains are as follows: 600cc machines  5 to 6HP, 750cc machines  7 to 8HP and 1000cc machines  9 to 10HP. Before any work is done to your bike we will take a baseline Dyno run and save the data.  Then after all work is done we will do a final tune on the Dyno to achieve maximum horsepower.  We then will provide you with the before and after Dyno printout sheet. The Dyno printout sheet will allow you to see yourself the great results that have been achieved by installing this package.  The total price for this package on most bikes is $1995.00 parts and labor. 

Call or email any questions you may have regarding this package.